| 2011 386 ultrashift swap to manual |
| 02-05-2020, (Subject: 2011 386 ultrashift swap to manual ) Post: #2 | |||
| |||
| RE: 2011 386 ultrashift swap to manual Monitor vehicle speed with Insite. Is it reading more than 0 while moving? If not, then you will need to wire in a speed sensor to the rear of your transmission. I'm not from America, but all Paccar trucks I see with manual transmissions have 2 speed sensors - 1 for the cab and 1 for the engine. If there is already 1 wired to the ECM, then make sure you have vehicle speed source set to magnetic in Insite. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
2011 386 ultrashift swap to manual - samrath - 02-05-2020, RE: 2011 386 ultrashift swap to manual - Signature620 - 02-05-2020 RE: 2011 386 ultrashift swap to manual - samrath - 02-05-2020, RE: 2011 386 ultrashift swap to manual - Signature620 - 02-05-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.