Cummins makes it hard to pre plan overhaul

[ynot]

the CPL2733 is mixed in with the big bore motors so your kit could go either way 150mm or 152mm.

http://www.cumminsrockymountain.com/site...202015.pdf

thats not the full pdf from cummins I'm sorry I couldn't find the original but it's got the important page lol.


And the 2733 does have a 550hp cal, I'm honestly not sure why though cause it's got the torque cut back in the lower rpm range more then the 500 cals, so the 500hp will feel stronger where most guys use them in the 1200-1500rpm range. after about 1600 the 500hp will taper off and the 550 holds on a bit longer though.