| 10spd to 13spd(ATTN DRIVELINE GURUS) |
| 02-17-2020, (Subject: 10spd to 13spd(ATTN DRIVELINE GURUS) ) Post: #1 | |||
| |||
| 10spd to 13spd(ATTN DRIVELINE GURUS) My volvo needs a new clutch...previous owner had ecm bumped up to 500hp...truck has eaton/fuller 10spd....I would like to swap in a 13...found one local but it's only 1450 torque...I have 1650 with the 10spd now. Will the 1450 13spd hold up or am I asking for problems? Thanks in advance. Rears are 3.58...11r 22.5 rubber. Pulling dry van 40~50k loads. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
10spd to 13spd(ATTN DRIVELINE GURUS) - Daytripper - 02-17-2020 RE: 10spd to 13spd(ATTN DRIVELINE GURUS) - smorgan87 - 02-17-2020, RE: 10spd to 13spd(ATTN DRIVELINE GURUS) - Lonestar10 - 02-17-2020, RE: 10spd to 13spd(ATTN DRIVELINE GURUS) - smorgan87 - 02-17-2020, RE: 10spd to 13spd(ATTN DRIVELINE GURUS) - Rawze - 02-17-2020, RE: 10spd to 13spd(ATTN DRIVELINE GURUS) - Waterloo - 03-09-2020, RE: 10spd to 13spd(ATTN DRIVELINE GURUS) - SC Josh - 03-08-2020, RE: 10spd to 13spd(ATTN DRIVELINE GURUS) - Daytripper - 03-09-2020, RE: 10spd to 13spd(ATTN DRIVELINE GURUS) - smorgan87 - 03-09-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.