Egr temperature sensor plug on motor
03-05-2020, (Subject: Egr temperature sensor plug on motor ) 
Post: #10
RE: Egr temperature sensor plug on motor
(03-05-2020 )Rawze Wrote:  
(03-05-2020 )Edjahman Wrote:  OK thank you. I'll give it another go tomorrow.

Appreciate the responses!


Just some related FYI:

For the CM871 engines ...
If your trying to remove the EGR temp sensor plug off a CM871, the older style sensor and plug are glued together and not meant to come apart. This older style will also have a thick layer of heat-shrink wrap over the whole plug to indicate that it is not supposed to come apart. - If someone has this type of shrink-wrapped sensor/plug, they follow the wire back up the harness, then buried back about 1 foot or so back from the plug is another in-line plug. That plug is where it is intended to be removed from and not by cutting away the heat shrink at the sensor itself.

Thank you for the information.
replyreply


Messages In This Thread
RE: Egr temperature sensor plug on motor - Edjahman - 03-05-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.