Conmet preset hubs

[Mattman]

ConMet preset steer hub.
How do you get the outer bearing and nut out of the hub??

Couple weeks ago changed my hub oil, of course this lead to my hub seal starting to leak. Trying to do the right things and this is what it got me. Haha

Anyways mine has a lock ring and a single nut that gets torqued to 300ft-lbs. Remove lock ring and loosen nut. Well the nut does not come off separate from the hub. The nut has tabs that ride in a groove inside the hub. Back nut off spindle and hub comes with it. I messed with it after getting hub off and couldn't figure how you get that nut out of the hub. The nut traps the outer bearing so you can't get it out. I replaced the seal and put it back together.
Anyone have experience with this??