Help Code 2636

[BLAKE7700]

(12-02-2021 )tree98 Wrote:  Are you using the same bad delete that was in it before? If so you probably won't ever see a fault code because most have been blocked. Your gonna need to get that tune straightened out before you go much further.

Someone could have thrown away the second terminating resistor when they hacked and slashed the harness so forget about looking for it and just wire in a new one.

Its a different tune than what it had when it came in. I was told this tune has been used in other trucks with same setup with no issues but idk.The only harness that was cut up was the engine harness because the truck came in with nothing but a manifold and non vgt turbo on the passenger side of the engine. I replaced the engine harness with brand new harness and plugged everything in that was there even if it wasn't being used. The reman engine was ordered as a factory drop in so it came with all the factory emissions stuff on the engine already installed.


Where would be a good place to wire in a terminating resistor for this, and what resistor would I need to get