Many questions
04-25-2020, (Subject: Many questions ) 
Post: #37
RE: Many questions
Can the Rev limiter be changed with just insite, believe I have the version they call pro??

Mine is at 1700 rpm, but not always. It will go part 1700 sometimes. If you Rev let off the throttle and rev again it won't go over 1700. Not sure what you call it, but would like it gone. Usually isn't a problem until you let off throttle and the you have to clutch to get it out of gear cause you let it hit 1700 and can't get it to rev higher.


User's Signature: 2015 Kenworth T660
replyreply


Messages In This Thread
Many questions - TruckerRalph - 04-17-2020,
RE: Many questions - Waterloo - 04-17-2020,
RE: Many questions - Rawze - 04-18-2020,
RE: Many questions - JimT - 04-17-2020,
RE: Many questions - Rawze - 04-17-2020,
RE: Many questions - Rawze - 04-17-2020,
RE: Many questions - Brock - 04-17-2020,
RE: Many questions - hhow55 - 04-17-2020,
RE: Many questions - JimT - 04-18-2020,
RE: Many questions - tree98 - 04-18-2020,
RE: Many questions - kozakvod - 04-18-2020,
RE: Many questions - kozakvod - 04-18-2020,
RE: Many questions - Craag - 04-18-2020,
RE: Many questions - Rawze - 04-18-2020,
RE: Many questions - Rawze - 04-20-2020,
RE: Many questions - hhow55 - 04-18-2020,
RE: Many questions - marek4792 - 04-18-2020,
RE: Many questions - Mattman - 04-20-2020,
RE: Many questions - JimT - 04-21-2020,
RE: Many questions - Rawze - 04-22-2020,
RE: Many questions - Rawze - 04-22-2020,
RE: Many questions - Rawze - 04-24-2020,
RE: Many questions - Mattman - 04-25-2020
RE: Many questions - Rawze - 04-25-2020,
RE: Many questions - Rawze - 04-26-2020,
RE: Many questions - Rawze - 04-26-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.