CM871 kickin my Butt
05-23-2020, (Subject: CM871 kickin my Butt ) 
Post: #17
RE: CM871 kickin my Butt
(05-23-2020 )RustyWood Wrote:  If Anyone is interested, this was the Best Price I found on the full Inline 6 Kit with Insite and Cables, most have been well over $200. Dollars.
https://www.obd2tool.com/goods.php?id=5067

The Injector Leak Tester can be found on Amazon for $98.99

If I need to replace, I'm going to need a Dial Torque Wrench and tool to replace, anyone found those at a good price ?

I have two of these, the 3/8" and the 1/4", these are the same units that Snap-On sells for triple the price. https://amzn.to/2ZCdRTP

I don't quite know what you are replacing, I am assuming an injector? If that is what you are needing a dial torque wrench for, inch pounds, this is what I use, an inexpensive beam wrench... https://amzn.to/2yt4UAR
AutoZone and O'Riely's sell them for around the same price. That is where I bought mine, and it works fine for adjusting the injectors.
replyreply
 Thanks given by: RustyWood


Messages In This Thread
RE: CM871 kickin my Butt - Waterloo - 05-23-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.