Home Oil Change and a bunch of other random questions
07-12-2020, (Subject: Home Oil Change and a bunch of other random questions ) 
Post: #5
RE: Home Oil Change and a bunch of other random questions
Be careful with the oil pan gasket... Been there and done that, especially if it has been on for awhile... por15 may not be the best thing to use on metal, it locks in the rust and does not allow the metal to breathe. I say that after researching undercoat treatments for a vehicle I was looking to purchase... I learned quite a bit. Personally, I would not use por15 on rusted or blemished metal, and I have, and it is ugly... Just saying. Coraseal, yes.


User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields.
replyreply
 Thanks given by: JimT


Messages In This Thread
RE: Home Oil Change and a bunch of other random questions - Waterloo - 07-12-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.