X15 questions
09-16-2020, (Subject: X15 questions ) 
Post: #11
RE: X15 questions
(09-16-2020 )marek4792 Wrote:  tree: mine had to be programmed in, depending on your truck you may just need a gauge and/or programmed in, shouldn't be more than an hour of labor.

There's no factory hole for the gauge because it has 3 lift axles and they took up all the available holes in a pete 567. If I could do what you're saying and just mount the gauge in a dashboard pod that would be cool.
I wonder what the reason would be(if in fact they actually do)for Cummins to want the oil temp higher on the X15 than on previous engines?


User's Signature: im_seeing_parameters_in_my_sleep 1
replyreply


Messages In This Thread
X15 questions - Explosia - 08-01-2020,
RE: X15 questions - Rawze - 08-01-2020,
RE: X15 questions - marek4792 - 08-01-2020,
RE: X15 questions - Explosia - 08-01-2020,
RE: X15 questions - marek4792 - 08-01-2020,
RE: X15 questions - Lonestar10 - 08-01-2020,
RE: X15 questions - Explosia - 09-16-2020,
RE: X15 questions - Rawze - 09-16-2020,
RE: X15 questions - tree98 - 09-16-2020,
RE: X15 questions - marek4792 - 09-16-2020,
RE: X15 questions - tree98 - 09-16-2020
RE: X15 questions - marek4792 - 09-16-2020,
RE: X15 questions - Rawze - 09-16-2020,
RE: X15 questions - Explosia - 09-16-2020,
RE: X15 questions - marek4792 - 09-16-2020,
RE: X15 questions - Volvo8873 - 09-16-2020,
RE: X15 questions - marek4792 - 09-16-2020,
RE: X15 questions - Explosia - 09-16-2020,
RE: X15 questions - Mattman - 09-16-2020,
RE: X15 questions - Explosia - 09-17-2020,
RE: X15 questions - Papa_Buck - 09-17-2020,
RE: X15 questions - Rawze - 09-17-2020,
RE: X15 questions - Explosia - 09-17-2020,
RE: X15 questions - marek4792 - 09-17-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.