Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / ECM

new reply
ECM
08-23-2020, (Subject: ECM ) 
Post: #7
cjcool Offline
Established  (1 Likes)  **

 		Posts: 17
Joined: Jan 2017
Thanks: 2
Given 1 thank(s) in 1 post(s)
RE: ECM
(08-20-2020 )Waterloo Wrote:  Wiring harness? Did you reuse your old harness or did one come on the motor that was used instead? Or, you have the wrong files on the new ECM, or did you reuse your old ECM? Do you know what programing is on the ECM? I would say ECM programing or harness issue. You can't install a motor out of a Volvo product into a PACCAR product without some tweaking. Assuming that is what was done?

More info please. Motor? ECM, new or old? Delete? Harness, new or old? Could be a few things...

from what i understand nothing was changed , came with the harness and everything , it dies not seem to be blocked off anyplace to be deleted
Return to Top | find
replyreply
new reply


Messages In This Thread
ECM - cjcool - 08-20-2020,
RE: ECM - Waterloo - 08-20-2020,
RE: ECM - cjcool - 08-23-2020
RE: ECM - Rawze - 08-21-2020,
RE: ECM - Chamberpains - 08-21-2020,
RE: ECM - cjcool - 08-21-2020,
RE: ECM - Rawze - 08-21-2020,
RE: ECM - cjcool - 08-23-2020,
RE: ECM - Rawze - 08-23-2020,
RE: ECM - cjcool - 08-25-2020,
RE: ECM - Rawze - 08-25-2020,
RE: ECM - cjcool - 08-25-2020,
RE: ECM - Rawze - 08-26-2020,
RE: ECM - cjcool - 08-26-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication