Leaking output shaft seal

[Chamberpains]

That electric half inch impact that kozakvod posted ain't gonna cut it for this type of job. They do make 3/4" and 1" electric impacts. Guys have told me they handle lug nuts nicely. I dont know about the bigger input/output/ intermediate/through shaft nuts. They are big and so are the sockets. Like flatbed94kid said a torch is sometimes needed to cut or heat them enough to get them off. Or one of the torque multipliers and a long cheater bar. But don't reuse the nut. Throw it away. They are almost always one time use.