7 codes J1939 system down
08-28-2020, (Subject: 7 codes J1939 system down ) 
Post: #2
RE: 7 codes J1939 system down
There is a 120ohm resistor in the OEM harness and another one inside the NOx sensor. They are in parallel, so should read 60ohms when both are good and there is no power in the circuit.

A bad terminating resistor will most definately upset the whole data link. Sometimes you can't even connect to the ECM with Insite while they're playing up.
replyreply
 Thanks given by: tree98 , Pd6cas2


Messages In This Thread
RE: 7 codes J1939 system down - Signature620 - 08-28-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.