cm2250 -cm871
10-06-2020, (Subject: cm2250 -cm871 ) 
Post: #11
RE: cm2250 -cm871
That's a good point, gotta keep the area clean. Wash the pump head and surrounding area then wipe it all down with a deisel fuel dampened rag or towel. Make sure to cover/plug any openings. But I think opening it for inspection 3 times between rebuilds is a reasonable number. Much less risky then waiting to get a code 559, or worse.


User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..."
replyreply
 Thanks given by: tree98


Messages In This Thread
cm2250 -cm871 - BigfootDiesel - 09-28-2020,
RE: cm2250 -cm871 - Rawze - 09-28-2020,
RE: cm2250 -cm871 - Waterloo - 09-29-2020,
RE: cm2250 -cm871 - Rawze - 09-29-2020,
RE: cm2250 -cm871 - Rawze - 09-29-2020,
RE: cm2250 -cm871 - JimT - 10-06-2020,
RE: cm2250 -cm871 - tree98 - 10-06-2020,
RE: cm2250 -cm871 - Waterloo - 09-30-2020,
RE: cm2250 -cm871 - Rawze - 09-30-2020,
RE: cm2250 -cm871 - JimT - 10-06-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.