Rebuild |
12-21-2020, (Subject: Rebuild ) Post: #15 | |||
| |||
RE: Rebuild (12-20-2020 )Waterloo Wrote: You need the cutting tool for the liner ledges, tool to measure and properly set liners and measure liner heights. I would do the front main seal too, because odds are it is time for a new crank shaft damper, a special tool is needed for the seal. Also, the head lifting tool comes in handy too when removing and setting the head. "head lifting tool"? Like a electric wench and a pry bar lol. The liner cutting seems to be outsourced relatively easily. I do not know about the damper tool, but i have seen the liner protrusion measures before. | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.