Dump Truck Build

[ahub86]

I figure I have about 200 hours into this project at this point. I have wrapped all new wires/ airlines with braided loom. I have used weather pack connectors on any electrical connection outside the cab. I have tried to run all air lines and wires as if they came from the factory that way. I took my time to shim the pto so it was dead nuts in the middle of the spec for backlash so it is virtually silent when it runs....etc etc. I want this project to look like it came from the factory this way. Or better than the factory in some aspects if possible. It is actually a lot of fun. I enjoy it anyway!!