Chassis Node fault code 5128

[Chamberpains]

It should definitely be noted anytime someone says they repaired a wiring harness, they should state what process they used to repair it.

People automatically assume they can just use any old way to fix harnesses. This more often than not leads to future electrical nightmares.

The only 2 ways I've ever had success in the long term repairing harnesses is to either completely run a new wire end to end with new pins or to properly solder splice a new wire in and heat shrink protect the splices. Simple crimp butt connectors WILL NOT work 100% of the time. Especially on sensor and 5v curcuits.

Any other process has lead to failure of some sort.