High EGT under torque and under acceleration cm2250 |
02-17-2021, (Subject: High EGT under torque and under acceleration cm2250 ) Post: #20 | |||
| |||
RE: High EGT under torque and under acceleration cm2250 Truck has 3.36 gear ratio. In 10th gear at 1500 Rpm's 70 + mph. Too fast for me. I coast or put it in neutral as much as I can. Just changed air filter last week. Tire pressures are at 105 all 10. Truck is also demandated by a forum member. I usually run 9th gear ,1700 - 1800 Rpm's and 60 -64 Mph. I went ahead and performed an injector performance test on insite and it passed. I was going to perform a leak down and cylinder cut out test , but I couldnt reconnect to ECM for whatever reason. I do have CEL for Ambient temp sensor . Im wondering if this could be issue ? | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.