thermoking apu no heat |
02-16-2021, (Subject: thermoking apu no heat ) Post: #12 | |||
| |||
RE: thermoking apu no heat (02-16-2021 )Yauchout Wrote:If fuel pump is the reason control module should set alarm code "No flame detected" but you say no alarms. Here is link to Eberscher diagnostic manual(02-16-2021 )Nostalgic Wrote: Mine was bellowing smoke and failing to start - the little fuel filter on the inlet of the pump was plugged up. The pump should have an audible clacking sound to it, when mine was plugged, it was virtually silent. https://www.google.com/url?sa=t&rct=j&q=...N31rMyord8 | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
thermoking apu no heat - Yauchout - 02-16-2021, RE: thermoking apu no heat - snailexpress - 02-16-2021, RE: thermoking apu no heat - Yauchout - 02-16-2021, RE: thermoking apu no heat - snailexpress - 02-16-2021, RE: thermoking apu no heat - Yauchout - 02-16-2021, RE: thermoking apu no heat - Rawze - 02-16-2021, RE: thermoking apu no heat - Yauchout - 02-16-2021, RE: thermoking apu no heat - snailexpress - 02-16-2021, RE: thermoking apu no heat - Nostalgic - 02-16-2021, RE: thermoking apu no heat - Yauchout - 02-16-2021, RE: thermoking apu no heat - Nostalgic - 02-16-2021, RE: thermoking apu no heat - snailexpress - 02-16-2021 RE: thermoking apu no heat - Chamberpains - 02-16-2021, RE: thermoking apu no heat - Nilao - 02-16-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.