Buying a truck I’m i doing it right?
03-13-2021, (Subject: Buying a truck I’m i doing it right? ) 
Post: #1
Buying a truck I’m i doing it right?
Hi everyone
I’m looking to make the leap from company to owner/op. I got a nice kenworth t800 2014 Tri axle ex logger truck I’m looking at. I’m front mount a hiab crane on the truck. The chassis has almost 600,000 km or 372,000 miles but 450,000 km on a rebuild. The trany is rebuild by Eaton last month. Did a blow by test on the truck and the dealer ship says it’s an 9.5 out of 18 said it’s a solid pass. Got a pre dot inspection done and got a list back. There is a rear structure leaking oil which I got a quote on. So with the repairs and inspections the truck still at a good deal. The truck it self is 20,000 front 69,000 rear and double frame with a Cummins. Just wondering is there anything else I can do and are the reports telling me anything about the truck? I can put up pictures up in couple hours of the engine the trucks about 5 hours drive
Thanks in advance
- Left side mirror lamp out
- Check engine light on ( they said they repair it before they give it to me)
- Rear bunk lights not working
- Driving/fog lights not working
- 1st Y-beam X-member cracked at right side Y-beam mount
- Forward and Middle Y-beam bushings worn at diff mounts
- Forward and Middle Y-beam diff mount worn out
- Rear diff Y-beam bushings worn at X-member
- Middle diff right side lower shock loose
- Rear diff right side backing plate missing
- Park brake valve between forward and middle diff leaking.
replyreply


Messages In This Thread
Buying a truck I’m i doing it right? - HiabGuy - 03-13-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.