Cm2250

[Bale309]

(07-07-2021 )Rawze Wrote:  

(07-07-2021 )Bale309 Wrote:  

(07-07-2021 )Rawze Wrote:  

(07-07-2021 )Bale309 Wrote:  ...
Thank you Rawze. How do i go about fixing it?

http://rawze.com/forums/showthread.php?t...5#pid58675

I have emailed the standard file to you thank you.

You need to get with someone else you want somebody to make a program for you. forum member 'running rough' comes to mind... though i doubt he will put those engine torture-setting your asking for in it.

There is no public overlay for that model engine running around, and it would take me a week just build something from scratch, as I don't have anything pre-made for it either... it is rare to see one of them on this side of the pond.

lastly.. you e-mailed me and asked me for 2250ft.FTlbs torque and 680-700 HP... I AM ASLO NOT ABOUT TO HELP SOMEONE TORTURE AND DESTROY THEIR ENGINE!!!! --- SO FORGET IT!!!!

Ok thanks for the help so far anyway i do appreciate it. Over here you hear people talk about 680 hp 2450ft lb of torque all the time. I assume thats just these engine destroying cals. I do not want to destroy my engine but i also want it better then standard due to the work we do. Sorry