| Cm870 vibration concerns |
| 08-10-2021, (Subject: Cm870 vibration concerns ) Post: #7 | |||
| |||
| RE: Cm870 vibration concerns Update: replaced #4 injector but vibration continues with low power. Ran leakdown test again to confirm injectors and passed also checked all o-rings under actuators while there. It’s actually getting harder to start and runs like it has air in fuel system. Very rough idle after startup for 15-20 seconds and still runs like it’s getting small amount of air in fuel. Pickup tube has been checked and has new supply lines, no air from tank to pump. Thoughts on next step? | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Cm870 vibration concerns - Precisionw900 - 07-13-2021, RE: Cm870 vibration concerns - Rawze - 07-13-2021, RE: Cm870 vibration concerns - Precisionw900 - 07-13-2021, RE: Cm870 vibration concerns - Precisionw900 - 07-24-2021, RE: Cm870 vibration concerns - Precisionw900 - 07-25-2021, RE: Cm870 vibration concerns - Rawze - 07-25-2021, RE: Cm870 vibration concerns - Precisionw900 - 08-10-2021 RE: Cm870 vibration concerns - Precisionw900 - 08-24-2021, RE: Cm870 vibration concerns - Rawze - 08-24-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.