Oil filter level
08-01-2021, (Subject: Oil filter level ) 
Post: #5
RE: Oil filter level
Thanks guys. I'll take the lack of concern here to mean that it's not a symptom of a problem that I need to address.

Normally I unscrew the oil fill cap before draining, this time I didn't. Maybe it's just a result of my procedural change. If it happens again I'll be sure to grab a picture before dumping the filter.

Incidentally, I've never punch a hole in the filter before removal. Sure, the first couple times I changed the oil I made a little mess, but I quickly figured out how to hold and maneuver the filter to limit spillage. Usually the most mess comes from residual dripping between old filter removal and new filter installation. Maybe I'm just lucky?


User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..."
replyreply


Messages In This Thread
Oil filter level - JimT - 07-30-2021,
RE: Oil filter level - Mattman - 07-31-2021,
RE: Oil filter level - tree98 - 07-31-2021,
RE: Oil filter level - JimT - 08-01-2021
RE: Oil filter level - tree98 - 08-01-2021,
RE: Oil filter level - JimT - 08-03-2021,
RE: Oil filter level - Ricky - 08-05-2021,
RE: Oil filter level - Rawze - 08-04-2021,
RE: Oil filter level - LRT1549 - 08-07-2021,
RE: Oil filter level - Rawze - 08-07-2021,
RE: Oil filter level - JMBT - 08-04-2021,
RE: Oil filter level - Toolguy - 04-11-2023,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.