Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Things that may help others... / Harmonic Balancer or Damper...

new reply
Harmonic Balancer or Damper...
04-06-2016, (Subject: Harmonic Balancer or Damper... ) 
Post: #20
Rawze Offline
Forum Reject  (13931 Likes)  *******

 		Posts: 11,038
Joined: Jun 2013
Thanks: 5897
Given 13931 thank(s) in 6088 post(s)
RE: Harmonic Balancer or Damper...
At 1.1 mil miles, i hope the rod and main bearings have been replaced at last once by now. Otherwise you will likely get a nasty surprise one day when a piston goes through the block with no warning whatsoever.

overhead should be run every 100k miles or so too, to catch if the head is ready to go.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Harmonic Balancer or Damper... - Rawze - 04-06-2016
RE: Harmonic Balancer or Damper... - Unilevers - 08-07-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication