2009 ISX600...engine light-stop engine light

[DavidG]

(09-13-2021 )Rawze Wrote:  

(09-13-2021 )DavidG Wrote:  ... swapped out for a new 2009 ISX600
...
It's a straight pipe set up
...

the next big concern is that it is obviously deleted ... you can be assured that the programming in the ecm is most likely bad (more than 90% odds are against you), and severely harmful to the engine. -- copy the program out of the ecm and e-mail it to me for review .. does not matter "how well you think it is running"... this should be your top priority if you give a damn about the engine at all.

Yes, the entire system was removed before it was even taken off the Crate for installation, the ECU was sent to BC in Canada, it's run good, but the Turbo pulses at Idle, it stops once it's in drive. How Can I copy the file from the ECU? I dont have any software to talk to it.