'12 ISX15 demandate woes...

[NDISX15]

Sounds good, I will get a check on that. From a mid project/completed inspection when I picked the truck back up from the mech, the wiring harnesses were taped over and nicely tucked away and secured. Im 90% sure that the resistors are all in place as required.....BUT....theres still that 10%. Ill grab my volt/ohm meter in the am and swing by the truck (1 mile away) and take a couple readings on it and hopefully be able to get the tune downloaded and sent off for a peek. Im kinda itching to compare it to the original cal myself and see what all was changed.