| CM 2350 J1939 Connection issues? |
| 09-21-2021, (Subject: CM 2350 J1939 Connection issues? ) Post: #5 | |||
| |||
| RE: CM 2350 J1939 Connection issues? also need to... You need to measure the resistance on can bus #2 to ensure it still reads 60-ohms with the truck shut off. - A lot of times, when people remove that stuffs, they unplug harnesses and it also removed the terminating resistor on can bus #2 inadvertently.. and later on, there are turbo and other issues with the engine. ref: http://rawze.com/forums/showthread.php?t...3#pid67713 User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
(Online)
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
CM 2350 J1939 Connection issues? - krisxjc - 09-21-2021, RE: CM 2350 J1939 Connection issues? - krisxjc - 09-21-2021, RE: CM 2350 J1939 Connection issues? - Nilao - 09-21-2021, RE: CM 2350 J1939 Connection issues? - tree98 - 09-21-2021, RE: CM 2350 J1939 Connection issues? - Rawze - 09-21-2021 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.