Cm 2250 hard to start when it sits 157.18 code under heavy load

new reply

Threaded Mode | Linear Mode

Cm 2250 hard to start when it sits 157.18 code under heavy load

09-28-2021, (Subject: Cm 2250 hard to start when it sits 157.18 code under heavy load )

Post: #9

Rawze

Forum Reject (13903 Likes)

Posts: 10,996
Joined: Jun 2013

Thanks: 5882
Given 13903 thank(s) in 6071 post(s)

RE: Cm 2250 hard to start when it sits 157.18 code under heavy load

(09-28-2021 )davidjrawls Wrote: Got pump apart it has the steel plungers
...

It does not matter what type of plungers are in the pump... they ALL are prone to failure ... even the newest models on the X15's ... the pump needs rebuilt every 400k miles or 8,000 hours to prevent severe engine damage.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.

Return to Top | find

reply reply

Thanks given by:

hookliftpete

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Cm 2250 hard to start when it sits 157.18 code under heavy load - davidjrawls - 09-27-2021,

RE: Cm 2250 hard to start when it sits 157.18 code under heavy load - Running rough - 09-27-2021,

RE: Cm 2250 hard to start when it sits 157.18 code under heavy load - Rawze - 09-28-2021,

RE: Cm 2250 hard to start when it sits 157.18 code under heavy load - davidjrawls - 09-28-2021,

RE: Cm 2250 hard to start when it sits 157.18 code under heavy load - Rawze - 09-28-2021

RE: Cm 2250 hard to start when it sits 157.18 code under heavy load - davidjrawls - 09-28-2021,

RE: Cm 2250 hard to start when it sits 157.18 code under heavy load - tree98 - 09-28-2021,

RE: Cm 2250 hard to start when it sits 157.18 code under heavy load - Rawze - 09-28-2021,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.