Power locks stopped working
12-03-2021, (Subject: Power locks stopped working ) 
Post: #3
RE: Power locks stopped working
I figured it out, the keyless lock module in the passenger door needed a hard reset. I pulled it out, unplugged, let her sit, plugged her back in and everything is working. Dodged a bullet there... If I had taken it to the dealer, that part is probably around $700 give or take in today's economy, if you can even get one. $300 to program it and say 2 hours of labor at $160, so roughly $400 in labor, they always round up. So, $1400 to fix something that was never broken. Imagine that? I'm in the wrong line of work.


User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields.
replyreply
 Thanks given by: Rawze


Messages In This Thread
RE: Power locks stopped working - Waterloo - 12-03-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.