Oil pan T joint sealants

[JMBT]

Signature620: My pan has 4 times before. 1st was checking for coolant intrusion with the system pressurized barring the motor, 2nd was changing rod and main bearings and replacing the oil pump, 3rd was swapping the new style oil pump back to a quieter old style oil pump, and 4th was to replace the flywheel housing gasket and rear motor mounts.

This time will be the 5th, and just because it is starting to leak at the corners.

Nostalgic: Does the one minute black give you enough work time to secure and torque the pan? I was thinking the 90 minute??