Turbo actuator hacking.

[Hush]

Just wanted to let everyone know I made the delivery. After some very slow mountain pulls (5 mph) the truck mysteriously started running just fine.

After the delivery I made it to a truck stop and inspected it thoroughly. I found a bunch of wires with worn-out insulation. There was at least 8 wires like that, coming out of the ecm.

Turns out the last shop forgot to put the plastic covers back on. The harness rubbed through against the charging wire.

Anyways, I cleaned and insulated everything. The truck has been running good with no issues since then.

So thank you evenryone for your suggestion and advice.