CAT 3126B no start
04-06-2022, (Subject: CAT 3126B no start ) 
Post: #7
RE: CAT 3126B no start
Also, according to the schematics I have, the circuits for both timing/speed sensors have the correct pin locations at the ECM connector. And those circuits in the new engine harness have been load tested with a halogen headlight. These tests were done at the same time the ECM powers, grounds, and ignition were load tested.
replyreply


Messages In This Thread
CAT 3126B no start - Smokin64 - 04-04-2022,
RE: CAT 3126B no start - Rawze - 04-04-2022,
RE: CAT 3126B no start - Smokin64 - 04-06-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.