No codes
10-18-2022, (Subject: No codes ) 
Post: #10
RE: No codes
(10-17-2022 )Mr Hagg Wrote:  not if you didnt remove vgt from turbo.. You need to llook at fuel pressure before you start the truck to see what shes doing. THen look at the fuel pressure as you crank it. Does it jump right or not.... You can also look at cranks and cam sensor see what they are doing normally they will code if bad.... id be leaning on fueling... If you have it running and shut it off will it start right back up? Or does it take a bit to be slow start?
Mr.Hagg when it sits for my34 hour restart and I come back to start it. It starts and runs then about 1 or2 min in to running it starts to act like it’s starving for fuel and dies. Then I spin it back over try to give it fuel by the spins then like it primes backup. Only does after it sits 24 hours or so.
replyreply


Messages In This Thread
No codes - adams70 - 10-17-2022,
RE: No codes - Bengy88 - 10-17-2022,
RE: No codes - Bengy88 - 10-17-2022,
RE: No codes - Rawze - 10-17-2022,
RE: No codes - adams70 - 10-17-2022,
RE: No codes - Bengy88 - 10-17-2022,
RE: No codes - adams70 - 10-17-2022,
RE: No codes - adams70 - 10-17-2022,
RE: No codes - Mr Hagg - 10-17-2022,
RE: No codes - adams70 - 10-18-2022
RE: No codes - Rawze - 10-18-2022,
RE: No codes - adams70 - 10-18-2022,
RE: No codes - Mikanic - 10-18-2022,
RE: No codes - adams70 - 10-19-2022,
RE: No codes - adams70 - 10-21-2022,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.