How’s this Egr Cooler and Valve Look?
11-23-2022, (Subject: How’s this Egr Cooler and Valve Look? ) 
Post: #5
RE: How’s this Egr Cooler and Valve Look?
(11-23-2022 )BrandonOlsen Wrote:  ... On the turbo I didn't know if the while stuff on top of the blades was normal or not. If you look at the center of the turbo the round peice it looks like its partially broken off and didnt know if thats suppose to be like that or if it broke and I need to be worried

looked perfectly normal to me. The part your claiming is "broken off" is not.. it is part of how they shave the impeller to balance it after it is assembled.

as far as it being dirty.. someone was cheaping out on air filters.. not changing then m enough. or ran it with one of those garbage aftermarket "washable" air filters. -== ANY dust of dirt going into that engine and turbo will very quickly shorten the life of the engine and cause permanent excessive blo-by in the cylinders.. A proper air cleaner and regular replacements is extremely important.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: How’s this Egr Cooler and Valve Look? - Rawze - 11-23-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.