MM
01-15-2023, (Subject: MM ) 
Post: #11
RE: MM
(01-14-2023 )Bengy88 Wrote:  I don’t know about a file but I remember a certain someone posting pictures of good and bad tables on here once upon a time. Maybe these were in those pictures. I can’t remember

I think this is what you are referring to. Remeber that this is for the CM871 only...


For the prostar, cascadia and Volvo, as they have slightly restrictive CAC units ...

./uploads/202301/post_2_1673812031_4247f9cf131f0508c3e4fbabef3da782.png

For other Aero trucks like the T660, 587's, ans other trucks that are still Aero.. but have a bit less restrictive CAC units...
./uploads/202301/post_2_1673812041_89c19473c32919c25889a3da62c7a585.png

And for the square-nose trucks that have large front end and big CAC units, almost no restriction...
./uploads/202301/post_2_1673812050_3c007df0024e00ee1f1e6f9d0a23a6e6.png

NOTE: These tables are NOT for newer common rail engines. The numbers are too high for those engines.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: tree98 , Deeoux , Bengy88


Messages In This Thread
MM - Konstantin - 12-03-2022,
RE: MM - Rawze - 12-04-2022,
RE: MM - Konstantin - 12-04-2022,
RE: MM - kamiar - 12-06-2022,
RE: MM - Bengy88 - 12-06-2022,
RE: MM - Deeoux - 01-12-2023,
RE: MM - Rawze - 01-12-2023,
RE: MM - Deeoux - 01-14-2023,
RE: MM - Truckdriven - 01-14-2023,
RE: MM - Bengy88 - 01-14-2023,
RE: MM - Rawze - 01-15-2023



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.