Clutch pedal vibration
01-15-2023, (Subject: Clutch pedal vibration ) 
Post: #7
RE: Clutch pedal vibration
Is the clutch fork adjusted properly? I had this "pedal vibration" issue on 2 trucks in the past. Both had clutch forks that were out of adjustment by quite a bit.
They are only supposed to be 1/8" from the throw out bearing. It is adjusted by lengthening or shortening (lengthening if the gap is greater than 1/8") the linkage rods that attach the pedal to the clutch fork.
By the way both the trucks I had problems with, came this way from the factory....... WAY out of adjustment.


User's Signature: im_seeing_parameters_in_my_sleep 1
replyreply
 Thanks given by: Bengy88 , hookliftpete


Messages In This Thread
RE: Clutch pedal vibration - tree98 - 01-15-2023



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.