Odometer Readings
02-03-2023, (Subject: Odometer Readings ) 
Post: #8
RE: Odometer Readings
(01-21-2023 )DVT873 Wrote:  In INSITE on the left side look towards the bottom for "Trip Information" Click on that. Bunch of info there. Mileage will be at the top.

Everybody probably knows this but when you connect with INSITE you get a prompt asking if you want to create a workorder. It's a good idea to say yes. That saves an image of the ECM at that point in time. Later you can connect to the image and you will see everything like you were hooked to the truck. Fault codes, Features and parameters etc. In this case Trip information. Not as much info as California Termination I'm sure but way better than nothing. I am looking at mileage right now via an image on an ISX CM870.

I did look thru there, but none of the mileages the trip info was kicking out was matching the odometer on the dash. That truck in particular also had some fuel code (I don't remember now what it was off the top of my head) that said that the info in there would have been inaccucurate due to the issue it had at some point in it's life. Thank you all for the insight into this.
replyreply


Messages In This Thread
Odometer Readings - NDISX15 - 01-17-2023,
RE: Odometer Readings - tree98 - 01-17-2023,
RE: Odometer Readings - hhow55 - 01-18-2023,
RE: Odometer Readings - DVT873 - 01-21-2023,
RE: Odometer Readings - NDISX15 - 02-03-2023



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.