2006 Cm 870 cold weather derate
03-13-2023, (Subject: 2006 Cm 870 cold weather derate ) 
Post: #13
RE: 2006 Cm 870 cold weather derate
(03-13-2023 )tree98 Wrote:  You should be checking for 60 ohms out on the data link connector. On 870's they are hiding behind the air compressor usually. Battery power on the J1939 plug is pin B.

If your getting power and ground through the plug up to the inline device, and it isn't powering up, it's possible you got a dud. It does happen time to time.

Tree98, some gremlins are running around in my truck and are laughing at me lol. So like I mentioned the in-line 5 works and I was able to figure out why my Jake brake is not working on my n 14. It’s neat that you can see things like the clutch switch position and switches on/off on the dash! I’m pretty excited to have this tool.
So I tried doing a little trouble shooting on the in-line 5… I grabbed a couple wires and hooked the 9 pin j 1939 adapter that came with the in-line 5 and hooked up the serial end to the in-line 5 and put a hot and ground off a battery and the lights came on, on the in-line 5 (power light).
1.So I feel at this point I eliminated that the j1939 adapter cord and the in-line could be bad.
2.I have 12v at the 9 pin j1939 connector on the dash.

The only thing I can figure at this point (it’s dark out now) is the pins are not making a connection between the male and female 9pin j1939. I’ll try more tomorrow. I m hoping that’s all it is. Kinda like having to spread the connectors on a trailer connection.
replyreply


Messages In This Thread
RE: 2006 Cm 870 cold weather derate - Ron1 - 03-13-2023



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.