| Change RPM Parameters |
| 10-28-2023, (Subject: Change RPM Parameters ) Post: #6 | |||
| |||
| RE: Change RPM Parameters I hooked up to Insite and saw that gear down protection was on and was set to: -Gear Down Maximum Vehicle Speed (Heavy Engine Load) 58 mph -Gear Down Maximum Vehicle Speed ( Light Engine Load) 54 mph I disabled Gear Down Protection and also noticed that Load Based Speed Control was set to 1650 RPM's. Insite wouldn't let me disable this one so I just set it to 2100 RPM's. Hopefully this solves my issue. Thanks for your replies and info. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Change RPM Parameters - GunRunner - 10-27-2023, RE: Change RPM Parameters - ZeDx32 - 10-27-2023, RE: Change RPM Parameters - GunRunner - 10-28-2023, RE: Change RPM Parameters - Rawze - 10-27-2023, RE: Change RPM Parameters - GunRunner - 10-28-2023, RE: Change RPM Parameters - GunRunner - 10-28-2023 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.