| Questions about tappets and barrel valve |
| 12-23-2023, (Subject: Questions about tappets and barrel valve ) Post: #1 | |||
| |||
| Questions about tappets and barrel valve Hey everyone I replaced tappets ,pump,barrel etc . I have been getting 559 code which I did post earlier in the posts. I went ahead and pulled the head back off the pump to check the head. This is what I found. The tappets are fine cam in the pump is good. The barrel valve and plungers were like this when I took them off.  | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Questions about tappets and barrel valve - Nhramember - 12-23-2023 RE: Questions about tappets and barrel valve - tree98 - 12-23-2023, RE: Questions about tappets and barrel valve - Nhramember - 12-23-2023, RE: Questions about tappets and barrel valve - tree98 - 12-23-2023, RE: Questions about tappets and barrel valve - Nhramember - 12-23-2023, RE: Questions about tappets and barrel valve - tree98 - 12-23-2023, RE: Questions about tappets and barrel valve - SquareOne - 12-24-2023, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.