| Tools |
| 09-27-2016, (Subject: Tools ) Post: #20 | |||
| |||
RE: Tools (09-26-2016 )Signature620 Wrote: Can anybody give a comparison between Snap On and IR 3/4" air impacts? I've seen countless Snap Ons that can barely make the torque-turn on ISX head and main bolts. I don't use air tools except for the main bearings. it is just too problematic to use wrenches and a torque amplifier upside down under the truck. You end up trying to sling around 20-lbs of wrench and 4 feet of cheater pipes just do the final torque. got this one... http://www.northerntool.com/shop/tools/p..._200655835 It will put them in with no problem, but I have the air pressure on the compressor turned up to 150 PSI and feed it with 1/2 line WITHOUT quick-connects, but hydraulic pipe unions instead... https://amzn.com/B00D3CU5YI User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
RE: Tools - Hammerhead - 09-24-2016, RE: Tools - Old Driver - 09-25-2016, RE: Tools - arch stanton - 09-25-2016, RE: Tools - Hammerhead - 09-25-2016, RE: Tools - Rig Wrench - 09-25-2016, RE: Tools - Signature620 - 09-26-2016, RE: Tools - Rawze - 09-27-2016 RE: Tools - arch stanton - 09-26-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.