another dummy with a delete

[Fllwshper]

Thanks for your feedback and apologies for taking so long to respond. Even after I had gotten the delete, the engine wasn't overheating into unusual high temps and when I had the rebuild, there wasn't any real issues with engine temps dangerously climbing on steep and not so steep grades weather loaded or empty. It seems like the issue with hi oil temp first started when I replaced the fan clutch. Fan clutch operates as it should, kicking in at 210 degrees and cooling as it should. Coolant temp usually stays at or around 180. Oil cooler, thermostat, and oil temp sensor was all recently replaced . I have purchased the Calterm software and have been working with bengy88 (Rawze approved from this site) to try and get this issue resolved