3/4-Inch ratchet, 13-Piece... $79.00! |
12-31-2016, (Subject: 3/4-Inch ratchet, 13-Piece... $79.00! ) Post: #1 | |||
| |||
3/4-Inch ratchet, 13-Piece... $79.00! I just pulled the trigger on this, https://amzn.to/2V9rMPY GearWrench 80879 3/4-Inch Drive 12 Point Socket Set, 13-Piece It is $400 at Home Depot, and $215 at JB Tools... I paid $87.89 at the above Amazon link... Yes, they are twelve point regular shallow sockets, but includes a ratchet and extension... Good thing, GearWrench has a lifetime warranty everywhere, see AutoZone... All of that FOR $87? A no brainer in my book! There are a few sets left! Go get em! PART# ITEM NAME 80830 3/4" Drive 12 Point Socket 7/8" 80831 3/4" Drive 12 Point Socket 15/16" 80833 3/4" Drive 12 Point Socket 1" 80834 3/4" Drive 12 Point Socket 1-1/16" 80835D 3/4" Drive 12 Point Socket 1-1/8" 80838 3/4" Drive 12 Point Socket 1-3/16" 80839 3/4" Drive 12 Point Socket 1-1/4" 80840 3/4" Drive 12 Point Socket 1-5/16" 80841 3/4" Drive 12 Point Socket 1-3/8" 80852 3/4" Drive 12 Point Socket 1-7/16" 80854 3/4" Drive 12 Point Socket 1-1/2" 81400 3/4" Drive Quick Release Ratchet 81412 3/4" Drive Standard Extension 8" And a STEEL CASE! $79.00 + $8.00 shipping... Again, a no brainer. Ever need a 1-7/16 socket? I have, and go try and find one of those at ACE Hardware... If you CAN find one, it will cost you $30+. Enough said. Just trying to help... Do NOT pass this up. ;-) | |||
|
01-01-2017, (Subject: 3/4-Inch ratchet, 13-Piece... $79.00! ) Post: #2 | |||
| |||
RE: 3/4-Inch ratchet, 13-Piece... $79.00! 12-point -- yuck. especially if it is 3/4". -- just my thoughs on it, but then again, it may get someone out of a bind for cheap. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
07-05-2017, (Subject: 3/4-Inch ratchet, 13-Piece... $79.00! ) Post: #3 | |||
| |||
RE: 3/4-Inch ratchet, 13-Piece... $79.00! I use 12 pt for 12 pt bolts and nuts only. Too easy to round a fastener with one. However that ratchet isn't bad. I carry a 3/4 ratchet, a cheapie impact socket set in 6 pt and a second hand snap on 3/4 torque wrench I had recalibrated under my bunk, with a cheater pipe, pneumatic/hydraulic bottle jack, skid plate, 3/4 impact and jackstand...and a spare in back. All of it paid for itself the first flat I had... I set up my rig to provide compressed air on the side of the road for power tools. It also saved my ass in MD when I stalled outside of DC with all of my fuel in the passenger tank...I used the air to push the fuel back over to the driver's tank until I got it to fire up so I could head to the nearest truck stop to fix it...damn fuel crossover valves. If you get a 3/4 ratchet, a cheater pipe and 3" extension will allow you to bar the engine if needed too. User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker Overhauled @ 927k | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.