New Cylinder Head Part No.

[Signature620]

Could somebody let me know what part number they use for the brand new ISX heads? I the part number I came up with is showing only 1 in the country (Aus) and it's double the list price of a recon head.

Cheers.

[Brock]

When I called, they told me the part number was the same except at the end of it.....

RX for reman
NX for new

5 week build time as there were none available at the time.

[Waterloo]

It was the same when I did my in frame... It took a week or two to find one, I called all over and located one at a Cummins shop that someone ordered and never picked up. And yes on what Brock stated.

[jorden486]

Strange-I have bought 3 of them and only take about 10 days-2 weeks to get. Also only 400$ difference from my dealer for Reman vs new.

[flonly]

I will be doing my inframe soon .As long as you have all your correct numbers off motor is there any reason I coud not order one in advance?Or for some reason do you need to have the old one off first?Rawze did you have any trouble getting a new head when you did yours?

[flonly]

Just called cummins tampa they shoe one in atlanta and said there are several around the country.4700.00 and change retail..signiture620 is in AUS...My guess that is the issue

[Hedley]

4331387 $3537.43 plus state tax.

[flonly]

Thats a big difference from what tampa cummins told me

[Hedley]

$4700.00 and change is probably retail, we don't pay retail, the PN that I gave has been superseded to PN 5413782, there is one sitting at the KW dealer in Laredo for $3551.25 + tax, I can PM you the salesman number if you are interested in buying it.

*this is for a CM871