Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / gauge sensor placement

new reply
gauge sensor placement
02-09-2019, (Subject: gauge sensor placement ) 
Post: #1
Contributing V.I.P.tree98 Offline
Contributing V.I.P.  (1779 Likes)  ****

 		Posts: 3,022
Joined: May 2016
Thanks: 1026
Given 1779 thank(s) in 1125 post(s)
gauge sensor placement
I want to add a pyro to an L9 cummins. There's a good place on the exhaust pipe post turbo to put it but it's about 4" away from the doser. Is it going to read correctly with diesel spraying on it?
Return to Top | find
replyreply
02-09-2019, (Subject: gauge sensor placement ) 
Post: #2
Rawze Offline
Forum Reject  (14143 Likes)  *******

 		Posts: 11,345
Joined: Jun 2013
Thanks: 6012
Given 14143 thank(s) in 6229 post(s)
RE: gauge sensor placement
(02-09-2019 )tree98 Wrote:  ..
Is it going to read correctly with diesel spraying on it?

The fuel does not ignite until it hits face of the DPF typically.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication