Another oil pump shin question |
07-11-2016, (Subject: Another oil pump shin question ) Post: #1 | |||
| |||
Another oil pump shin question My cm2250 has 519047 miles/10693 hrs on it. Would it be advisable to shim the oil pump? Current oil psi at operating temp is 35. 40 when cold at idle. | |||
07-11-2016, (Subject: Another oil pump shin question ) Post: #2 | |||
| |||
RE: Another oil pump shin question 35 psi at operating temperature at idle is very good pressure. | |||
07-11-2016, (Subject: Another oil pump shin question ) Post: #3 | |||
| |||
RE: Another oil pump shin question | |||
07-11-2016, (Subject: Another oil pump shin question ) Post: #4 | |||
| |||
RE: Another oil pump shin question Then you need to bump it up . Read Hammerhead's post and few other's related . | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.