Off road isx15

[Brunolily]

Oh shoot , forgot !! Turbo actuator gear , turn w/ fingers AND make sure the turbo wastegate moves free and smooth ( silky )

[Rawze]

(02-15-2020 )Brunolily Wrote:  Thank you tree , been there . We actually have our salesman include and new fuel pump ( in the box ) every time we purchase a used truck. I’ll usually get him to pay for half ( $5200 for new fuel pump ) , I’ll try to help out you guys who have the mandate exhaust filters . I can say this now . If you get a ex gas pressure code and imap code , turbo actuator is faulty ( see if you can turn actuator gear w: your fingers). That will soot up the all the plumbing, fast , all of !!! And cause an utter nightmare. Actuator is bout $1100. Do your maintenance

Turbo actuator is not a nightmare ... take it apart and replace the bearings, re-grease it with some red-line synthetic grease and it will be like brand new again. - if a person did this every 300k miles or so, they will easily last a million miles.

its called MAINTENANCE.

[Brunolily]

Awesome, didn’t know you could replace bearings .

[Chamberpains]

Hang around for awhile. You'll probably learn there's a lot you didn't know. I've been here for a couple years and still constantly learn stuff.

[Rawze]

(02-15-2020 )Brunolily Wrote:  Awesome, didn’t know you could replace bearings .

https://www.mcmaster.com ...

bearing part#'s ... 5905K531, 5905K352, 5972K211, 5972K157, 5905K73, 7804K116

[sprayerman]

(02-15-2020 )Rawze Wrote:  

(02-15-2020 )Brunolily Wrote:  Awesome, didn’t know you could replace bearings .

https://www.mcmaster.com ...

bearing part#'s ... 5905K531, 5905K352, 5972K211, 5972K157, 5905K73, 7804K116

Any good videos out there of tearing down, cleaning up, and replacing bearings?

[hhow55]

Yup, just click on videos, and enjoy!

[sprayerman]

(02-16-2020 )hhow55 Wrote:  Yup, just click on videos, and enjoy!

Found it. I've learned a lot around here in no more than a week! Thank you!

[Rawze]

(02-16-2020 )sprayerman Wrote:  

(02-15-2020 )Rawze Wrote:  

(02-15-2020 )Brunolily Wrote:  Awesome, didn’t know you could replace bearings .

https://www.mcmaster.com ...

bearing part#'s ... 5905K531, 5905K352, 5972K211, 5972K157, 5905K73, 7804K116

Any good videos out there of tearing down, cleaning up, and replacing bearings?

I am likely going to start making a video series on refreshing the insides of the ISX VGT actuator within next few weeks or so. - Idea has been in the works for a while, just wanted to get involved with doing a bunch of them before making the videos so that I can talk about what is typically seen.