Help low boost |
02-25-2016, (Subject: Help low boost ) Post: #37 | |||
| |||
RE: Help low boost wd40 and spray couple days , you dont want to brake those rusty bolts User's Signature: Cascadia ISX15 CM2350 | |||
02-25-2016, (Subject: Help low boost ) Post: #38 | |||
| |||
RE: Help low boost Yea I'm gonna try but the look really bad | |||
02-25-2016, (Subject: Help low boost ) Post: #39 | |||
| |||
RE: Help low boost | |||
02-25-2016, (Subject: Help low boost ) Post: #40 | |||
| |||
RE: Help low boost I would say that you may have to put socket on then stick with hammer. I would also use a impact hand driver with a socket the shock my get it. I think the biggest problem is that bolts will be siezed in the actutor because it's aluminum. | |||
02-27-2016, (Subject: Help low boost ) Post: #41 | |||
| |||
RE: Help low boost So this was the issue. I pulled off the actuator and ran the install procedure and it failed. Turbo was ok and moved nice and smooth.picked up the actuator for 436.00 at the local cummins dealed. Install went smoothly and truck is running great.I wanna thank everyone for the help and advice. | |||
02-28-2016, (Subject: Help low boost ) Post: #42 | |||
| |||
RE: Help low boost The thing that concerns me is ne codes that bad actuator should have lit up the dash like a christmas tree. | |||
02-28-2016, (Subject: Help low boost ) Post: #43 | |||
| |||
RE: Help low boost | |||
02-28-2016, (Subject: Help low boost ) Post: #44 | |||
| |||
RE: Help low boost Yea I thought it was strange it didn't give me any codes. If it wasn't for the boost gauge I wouldn't have noticed until I got a heavy load which I don't do many of. | |||
02-28-2016, (Subject: Help low boost ) Post: #45 | |||
| |||
RE: Help low boost It is not factory block i can tell you that. I have never seen this fault blocked from factory. | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.