| Brake control module |
| 05-24-2022, (Subject: Brake control module ) Post: #1 | |||
| |||
| Brake control module Wheres this module on a peterbilt 388, and how to test it? Has a code something like "cant find abs module" , i think it was spn 1481 | |||
| 05-24-2022, (Subject: Brake control module ) Post: #2 | |||
| |||
| RE: Brake control module From what I can tell this is an issue between the cab controller and the abs module on the J1939 datalink. I would think you could follow an abs sensor wire to the module and then check the typical power/ground and then your canbus wires. Don't seem to be a lot of info about this error out there. | |||
| 05-25-2022, (Subject: Brake control module ) Post: #3 | |||
| |||
| RE: Brake control module Unplugged brake module and plugged back in and everything is working again... | |||
| 05-26-2022, (Subject: Brake control module ) Post: #4 | |||
| |||
| RE: Brake control module Hey...fixed is fixed. | |||
|
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.