Borescope... Anyone use a Milwaukee unit? Or the Rigid?

[Waterloo]

This Rigid unit... https://www.homedepot.com/p/RIDGID-CA-25.../203258908

Or this Milwaukee unit... https://www.homedepot.com/p/Milwaukee-M1.../202932657

I don't know, is it even worth it to look into the water jacket of this abortion I am working on? The Milwaukee unit, the end of the scope, looks a bit to long to get in there, where the Rigid looks quite a bit more compact.

Have any of you used either, or can recommend one that would be locally available in a major area, say from FleetPride or other automotive chain stores.

[NDISX15]

I dont know if you have a menards store near you, but I have one from a brand called "masterforce" that I paid like 120-130 for that works pretty well. It's a house brand kinda thing. At the shop I use a snap on boroscope that I scored cheap off the matco truck that someone traded in. Pretty nice and the camera is wireless from the screen.

[Waterloo]

I will look it up... Thanks for the heads up. Found it... https://www.youtube.com/watch?v=P75UT95DsVQ

[tree98]

I doubt you'll see much in the water jacket. Any silicone that got in there is probably stuck in the radiator.

[Waterloo]

Agree, just a thought, I will be better off with a shop vac at this point. Going to g grab that little one out of my truck on the way in.